RE: [TCML] Connecting the primary

[Jeremy Scott <supertux1@xxxxxxxxx>]

Yeah I've been scratching my head trying to find something that won't short adjacent coils, will support the weight of the 1/0 wire 
and will be easy to adjust. 

--- On Mon, 7/28/08, Stephen J. Hobley <shobley@xxxxxxxxxx> wrote:

> From: Stephen J. Hobley <shobley@xxxxxxxxxx>
> Subject: RE: [TCML] Connecting the primary
> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
> Date: Monday, July 28, 2008, 12:03 PM
> I saw someone using fuse holders for the primary taps -
> which I thought was clever at the time. They fit well on
> the 0.25" primary winding.
>  
> I've using spring loaded clips with a 20 amp rating,
> but they are a bit on the bulky side and I run the risk of
> shorting to adjacent coils.
>  
> Steve
>  
> 
> 
>      
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla_______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


      
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla