[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Primary angles






?>Then is it feasible to wind the primary right on the secondary coil form
below the secondary windings?

Tony,

This has been done, but the coupling cannot be adjusted easily
unless the primary is such that it can slide along the secondary form.

John





Or use a reversed cone primary to get the outer
windings below the bottom of the coil? Any advantage/disatvantage to
either,
other than the additional height?

Tony Greer

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla