[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Should I repot this NST?



LOL Personally, I'd gat that muck out of there, clean her up nicely
and let that old girl show off her silvery bits mounted dry in a nice
acrylic casing, and in appreciation, I am sure she'd reward you
handsomely in quality sparks for a good while yet!

;-)

2008/9/20 Stephen J. Hobley <shobley@xxxxxxxxxx>:
> I got hold of a 12kv 60ma NST from a local sign company. It's pretty old
> and the potting is a bit cracked, as you can see:
>
> http://www.flickr.com/photos/20929480@N03/sets/72157607383559345/
>
> It passes the "arc to case" test on both sides without any issues, but I
> was wondering if I should repot/remelt this?
>
> I almost cranked up the grill, but then I read how you can overcook the
> potting on towards the base if not careful.
>
> I did melt some of the bigger cracks closed with my 'pocket blowtorch'.
>
> Steve
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla