[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] question of construction - is metal okay at the center ofprimary?



I have been thinking of building an 8" coil using a 7.5kva neon bombarder transformer.

Do you think I could have problems if I put the transformer in the base of the tesla coil?

It would be nice to just run 220 and control to the coil instead of high voltage.


Kevin


----- Original Message ----- From: "Ryckmans, Thomas" <Thomas.Ryckmans@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, September 17, 2008 9:43 AM
Subject: [TCML] question of construction - is metal okay at the center ofprimary?


Hello,

Further to my construction question (thanks to DC for some tips) - I was
wondering if it was okay to have a bit of metal at the center of the
primary. I would need to place a few bolts there to hold the secondary
in place. Aren't eddy currents in that metal going to be a
problem/loss/source of heating??

Many thanks

Thomas



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla