[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] TUNGSTEN TUNGSTEN TUNGSTEN



I use one of the Dremel fiberglass reinforced cut off disks. Remember to do it outside if you're cutting 2% thoriated tungsten, and take a shower as soon as you're done cutting to get the dust off you.

David E Weiss




Are you cutting 1/2" or larger rod this way? I've cut small diameter rod with a Dremel cutoff disk, but I feel like 1/2" may be a bit much.

Adam

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla