[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] X-ray cable best practices for feeder cable




Hi Stan, 



I assume that you're referring to the hooked 

blade razor knives that roofers use to cut and 

trim shingles.? 



David Rieben 



----- Original Message ----- 
From: "Stan" <wsmg@xxxxxxxxxx> 
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx> 
Sent: Tuesday, January 6, 2009 9:47:28 AM GMT -06:00 US/Canada Central 
Subject: Re: [TCML] X-ray cable best practices for feeder cable 

Hey Jim, 

The easiest way I found to strip the shield is with a hooked razor 
knife. Cut the cover and the shield at the same time, the cover helps to 
support the shield to cut easier. Watch the angle you keep the knife at 
and the knife won't damage the insulator. 

Hope this helps, 
Stan 

_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla