[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] MMC



Hi all,
As some of you may know, i am new to the Tesla world.But i wanted to know, because some of the materials used in the Tesla coil can be hard to find i just wanted to know if i could use "20 X 0.47 uF / 1000 V. METALLISED POLY AXIAL CAPACITORS" set up in 2 stings of 10 (caps) set up in parallel, to reach the 0.0095uF, 10kv that the output of a 10kv, 30ma, NST.but the NST needs 0.0095uF for the capacitors but, using the MMC calculator on "DeepFriedNeon.com" the capacitance of those capacitors wired up in two strings in parallel (10 caps each) it comes to 10kv and 0.0094uF.
Will that make a major problem being the capacitance off by 0.0001or will it be fine like that ?
Thanks heaps,Mitch ~ Gb
_________________________________________________________________
View photos of singles in your area Click Here
http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Fdating%2Eninemsn%2Ecom%2Eau%2Fsearch%2Fsearch%2Easpx%3Fexec%3Dgo%26tp%3Dq%26gc%3D2%26tr%3D1%26lage%3D18%26uage%3D55%26cl%3D14%26sl%3D0%26dist%3D50%26po%3D1%26do%3D2%26trackingid%3D1046138%26r2s%3D1&_t=773166090&_r=Hotmail_Endtext&_m=EXT_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla