[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Magnifier topics



Antonio Carlos M. de Queiroz skrev:
Finn Hammer wrote:
Original coil:
389mH (measured Meterman 37XR)
Diameter: 200mm
Length:     860mm
Toroid 100mm above top turn.

Initial voltage C1=000V (1200V IGBT as gap)
Gap has been known to pass 4500Apeak  :-)
I tried some designs, listed here:
http://www.coe.ufrj.br/~acmq/tesla/magdesign.pdf

Antonio,
Another good read from your hand.
I am impressed by the level of order you can create, by applying math to what appears to me as chaos.
The curves of mode k:k+1:3k look so beautiful that it has to be tried.

I believe you mean by "distributed C2", that it can be made up of L1 top terminating corona ring, L3 bottom screening toroid and whatever metal connecting the 2.
Is that right?

Paul, have you tried to model any of these highly coupled 3 coil systems, to form an opinion of where would be a good place to start?

Cheers, Finn Hammer
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla