[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Terry Filter Perf Board



 
Hi Hairball!

Yes, this will probably be an issue.
However, if you need some bare perfboard, I'd be happy to send you some free of charge.
Just contact me via email and I can send you down some pieces.

Thanks
Daniel McCauley
http://www.easternvoltageresearch.com
DRSSTC, SSTC, Flyback Kits and Components!



Dear Gadget Guru's

 After Completing My First Basic Coil ( 9k/30 ), I Have Started Building A BIGGER More Involved ( 15/60 ) Coil.
 While Assembling My Terry Filter It Occurred To Me That The Perfboard I Used ( the kind with little copper pads at each hole ) Might Have Been A Mistake. Will The Little Copper Pads Arc Across Like So Many Little Spark Gaps?
 Any Guidance Is Welcome.

Thanks, Hairball :)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla