[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] DdRSSTC driver board with parts



I would prefer to see pictures, etc....not a bunch of smoke and mirrors
snake oil sales, as has been past experience. Back it up with evidence or
take a hike.

Hank

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of DC Cox
Sent: Sunday, November 07, 2010 9:31 AM
To: Tesla Coil Mailing List
Subject: Re: [TCML] DdRSSTC driver board with parts

WEe using a proprietary circuit we developed over a 2 yr. testing period.

With our 24" dia. sec coil it is producing 16 ft sparks that are white hot.
We qre running a steqady 100 amps, 220 volt doubler, so driven at 635 VDC.

Finn's circuit doesn't work properly for a few reasons I will not discuss
any more. I got blasted laqst time and I refuse to discuss it.

Yes, you can see this coil run at our next Teslathon.

Dr. Resonance




And, p[lease guys, any inquiries on the DRSSTC caps or driver boards ----
OFF LIST ONLY as per re


On Sun, Nov 7, 2010 at 6:38 AM, daniel@xxxxxxxxxxxx
<daniel@xxxxxxxxxxxx>wrote:

> Is it possible to see a working coil with this system of yours?
>
> Driving big brick like the CM1200 is not an easy task! I've been working
> with Finn Hammer on his huge drsstc named thumper for some years now. And
I
> can tell you that driving a bridge of CM600 and getting 13 feet of sparks
is
> not easy.
>
> Cheers, Daniel Uhrenholt
>
> Sendt fra min HTC-telefon
>
> ----- Reply message -----
> Fra: "DC Cox" <resonance@xxxxxxxxxxxx>
> Dato: lør., nov. 6, 2010 09:48
> Emne: [TCML] DdRSSTC driver board with parts
> Til: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
>
> We recently completed testing on our our DRSSTC driver board design.  I
> will
> have stuffed boards available in early Feb.
>
> The unit can be adjusted to work with Powerex CM300 (4-5 ft spark), CM600
> (6-8 ft spark, and even CM1200 wih spark lengths up to 16 feet.
>
> It has proven very robust and reliable as we use a fiber optic connection
> from modulator to main board.
>
> Precise adjustment of zero cross points can be set for each IGBT module
> thus
> allowing near perfect efficiency!
>
> Dr. Resonance
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla