[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Corcom EMI filter



The filter case should be connected to the mains green-wire ground.  I've
written a web page on this very non-intuitive topic:
http://www.laushaus.com/tesla/emifilter.htm

Regards, Gary Lau
MA, USA

On Tue, Nov 9, 2010 at 4:01 PM, Steve Vance <steve_vance@xxxxxxxxxxxxx>wrote:

> Hello List,
>  After reading about all the stuff other people have fried with their Tesla
> Coils I think I will add some more protection to my current build. I have a
> few Corcom 30VSK6 30 amp EMI filters laying around. I think I will put one
> on the supply line of my 12/30 NST powered coil. The question I have is,
> would it be better to connect the case ground of the filter to the mains or
> the rf ground?
> Any input would be appreciated.
> Steve
>
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla