[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Rebuilding



On Sun, Sep 26, 2010 at 12:44, Miles Mauldin <teslamiles@xxxxxxx> wrote:

> I have some thin walled PVC (4.125" OD, 3.875" ID), sanded and completely
> clean
> I wish to use as the secondary coil form. I have 1300' 23AWG heavy coat
> magnet
> wire. The rest of the TC is already built and the exact parameters have
> been
> entered in JavaTC. The speces for the secondary are what I am concerned
> with
> right now, unless of course some of you feel there is reason to change
> anything.
> http://www.cmnow.com/TeslaMan/Specs.txt
>
>
Those specs look "okay" but for get better performance from the coil you
really should use thinner wire to wind the secondary and bring the Fo down.
I'd suggest #26 or #28.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla