[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Sync gap setup



Hello,
I need some help setting up a synchronous rotary gap. I have built several coils with static gaps. This is the first sync one. Gap is 1800 RPM motor and four tungsten flying electrodes, and 2 stationary. Phase is adjusted by disc position. Have built a larger MMC bank for rotary operation per a design program. Any help on getting the phase adjusted with simple tools would be greatly appreciated.
Thanks.

Brad McPeak

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla