[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] RE: 942C current?



yes, I have a datasheet which I will email to you as I can't post on the
List   --- viruses.

You can easily run the 5 kVA unit at 10-12 kVA with no problems.  You will
need a suitable current reactor to control the current.

Dr. Resonance




On Wed, Mar 2, 2011 at 10:44 AM, Bob Arenella <rja12@xxxxxxxxxxx> wrote:

>       Dr. R,
>                          Yes, please, more info on the pole pig caps! I
> have a nice 5 KVA dual bushing 14.4 KV pig just waiting to be put into T/C
> service.
>
> Regards,
> Bob
>
> ----- Original Message ----- From: <jeremyee@xxxxxxxx>
> To: "Tesla List" <tesla@xxxxxxxxxx>
> Sent: Wednesday, March 02, 2011 8:50 AM
> Subject: Re: [TCML] RE: 942C current?
>
>
> What cost per CD cap are you willing to sell them for?
>>
>> Also just out of curiosity, how much for the pole transformer capacitors?
>> Do you have details on that cap anywhere?
>>
>> Thanks!
>>
>> Jeremy
>> Sent from my BlackBerry device from Cincinnati Bell Wireless
>>
>> -----Original Message-----
>> From: DC Cox <resonance@xxxxxxxxxxxx>
>> Sender: tesla-bounces@xxxxxxxxxx
>> Date: Tue, 1 Mar 2011 09:48:14
>> To: Tesla Coil Mailing List<tesla@xxxxxxxxxx>
>> Reply-To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
>> Subject: Re: [TCML] RE: 942C current?
>>
>> We have a large order of MMCs arriving in mid April.
>>
>> I also have 12 pcs of our .07 uF (70 nF) 80 kV caps for pole transformer
>> driven coils.
>>
>> I got a great deal on a used $45,000 foil cap winder, so have been rolling
>> my own.  We now use them in all of our large coils.
>>
>> Dr. Resonance
>>
>>
>>
>>
>>
>> On Mon, Feb 28, 2011 at 11:10 PM, Etienne Dreyer <chemistets@xxxxxxxxxxx
>> >wrote:
>>
>>
>>> Hi everyone,
>>> I was going to order the 942C series cornell dubilier caps (2kV, 0.15uF
>>> http://www.cde.com/catalogs/942C.pdf ), but am now worried that their
>>> current (amps) ratings are too low for my MOT driven coil. Should I order
>>> the more expensive 941C caps (1.2kV, 0.22uF
>>> http://www.cde.com/catalogs/941C.pdf) although their dV/dT ratings
>>> aren't
>>> as good? Does someone know which are better for the high current output
>>> of
>>> MOTs?
>>> Many thanks,
>>> Etienne
>>> _______________________________________________
>>> Tesla mailing list
>>> Tesla@xxxxxxxxxx
>>> http://www.pupman.com/mailman/listinfo/tesla
>>>
>>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>>
>
>
> --------------------------------------------------------------------------------
>
>
> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla