[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] IGBT Module



While I think of it, does any one have any tips to keep this voltage across the transitor (when switching the cathode of a valve to ground), or maybe snub it out somehow.

Then maybe I could use a much cheaper transistor....


Carlos


----- Original Message ----- From: "Bayley Wang" <wang9xb17@xxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Tuesday, September 06, 2011 4:24 AM
Subject: Re: [TCML] IGBT Module


What application, and what budget? HV bricks are going to cost you an arm
and a leg, and perhaps some more...
For example, a quick glance at Mouser tells me that a 6300V 600A Infineon
brick costs $3300...

On Mon, Sep 5, 2011 at 4:49 AM, Carlos Van Camp <
carlos@xxxxxxxxxxxxxxxxxxxxxx> wrote:

Hi Can anyone suggest a good place to buy HV IGBT modules.
I am in New zealand and a lot of companies wont deal internationally...

I am looking for something around 4.5kv - 6kv at 600 Amps.
I need only  1 at first, but probably buy 2 more shortly after.
Purhaps someone on list has one to sell...?

Thanks,

Carlos
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla