[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Pole Pig Question



I have a 14.4 kV 25 kVA pig, and am quite happy with it. I regularly feed it 280 volts at 100 amps and it doesn't even work up a sweat.

Ibuilt a small plywood and four wheeled stand, and can easily roll it anywhere I want.



________________________________
 From: David Rieben <drieben@xxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx> 
Sent: Thursday, July 25, 2013 4:35 PM
Subject: Re: [TCML] Pole Pig Question
 

Miles,

I personally don't see a 10 or 15 kVA unit as a "waste of money" as they will run quite comfortably on just about anything that you can throw at them from a typical single phase residential service. In fact, I have ended up burning up a 5 kVA unit before - there I admitted it, yes, I do have a piggy mortality count of one, although the "murder" was not Tesla coil related. ;-) OTOH, you do also have to consider size and weight when you start piling on the kVAs. I would personally think that a 25 kVA unit approaches the threshold of "impractically big". Most typical 10-15 kVA piggies tip the scales in the 200-300 lb. range, while 25 kVA units are typically >350 lbs.

David Rieben

Miles Mauldin <TeslaMiles@xxxxxxx> wrote:

>Good information from all, thank you. And thank you David for that 'extra' bit of info from Jeremy's question, most helpful.
>
>Most everything I see online requires local pick-up. Do most of you go and pick up your pole pigs?
>
>I also see some larger transformers that will ship. Are 15 or 25 Kva units worth investing in? Or are they a waste of money since one cannot provide enough input power to utilize their potential?
>
>Thanks!
>Miles Mauldin 
>
>Sent from a little device with a tiny keyboard. 
>
>On Jul 25, 2013, at 11:58 AM, David Rieben <drieben@xxxxxxx> wrote:
>
>> Hi Jeremy,
>> 
>> Actually, you can run a pig "backwards" on either 120 or 240 volts. The three low voltage bushings that you see on the side of the tank are simply a 240 volt output (or input for coilers) with a usually tank-grounded center tap: 120-0-120. However, keep in mind that you will need to remove that center terminal grounding strap to the tank if you run 240 volts in, which is what most pig coilers do. If you decide to run it on 120 volts input, you can leave the grounding strap in place and connect the white return lead to it and the black "hot" lead to either of the other outer terminals. The draw back with the 120 volt input versus the 240 volt input is that it will draw twice the amperage for the same output, so if you're trying to drive say 10 kVA, what would require 50 amp service with a 240 volt input would require 100 amp service with a 120 volt input. 
>> 
>> David
>> 
>> Jeremy Gassmann <jeremyee78@xxxxxxxxx> wrote:
>> 
>>> Hi,
>>>   Another question related to this post...I am currently in the process
>>> of building a house and want to prewire an outside outlet for a future pig.
>>> I was planning on a 50A/120V outlet but this post got me wondering...what
>>> is more common with pigs, 120V or 240V? Should I run a 240V line instead?
>>> Thanks a lot!
>>> 
>>> Jeremy
>>> On Jul 25, 2013 8:14 AM, "McCauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>
>>> wrote:
>>> 
>>>> They should say 14.4kV on the nameplate.
>>>> 
>>>> If the transformer has 7.2kV on the nameplate, its just that - 7.2kV.
>>>> 7.2kV is another common primary voltage for these transformers.
>>>> 
>>>> You would probably want a 14.4kV/240V 5kVA or 10kVA unit.  The 3kVA units
>>>> are "small and cute" but harder to find.
>>>> 
>>>> Dan
>>>> 
>>>> -----Original Message-----
>>>> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
>>>> Behalf Of Miles Mauldin
>>>> Sent: Thursday, July 25, 2013 7:03 AM
>>>> To: Tesla Coil Mailing List
>>>> Subject: EXTERNAL: [TCML] Pole Pig Question
>>>> 
>>>> Hi all,
>>>> 
>>>> I am in the market for a pole pig, and my first choice is a dual horn, HV
>>>> 14400, LV 120/240. I se several different voltage combinations and am
>>>> wondering what are the differences.  My biggest question is why some of the
>>>> 7200 HV units don't list 14400 as the total HV? If this information is in
>>>> the archives please direct to its location.
>>>> 
>>>> 7970/13800Y
>>>> 7200/12470Y
>>>> 
>>>> Continue to enjoy all the expert posters and information provided.
>>>> 
>>>> Thanks!
>>>> Miles Mauldin
>>>> 
>>>> Sent from a little device with a tiny keyboard.
>>>> _______________________________________________
>>>> Tesla mailing list
>>>> Tesla@xxxxxxxxxx
>>>> http://www.pupman.com/mailman/listinfo/tesla
>>>> _______________________________________________
>>>> Tesla mailing list
>>>> Tesla@xxxxxxxxxx
>>>> http://www.pupman.com/mailman/listinfo/tesla
>>>> 
>>> _______________________________________________
>>> Tesla mailing list
>>> Tesla@xxxxxxxxxx
>>> http://www.pupman.com/mailman/listinfo/tesla
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>_______________________________________________
>Tesla mailing list
>Tesla@xxxxxxxxxx
>http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla