My NST is 7500V at 30 mA. What unit is Apk?
-------- Original message --------
From: tesla-request@xxxxxxxxxx
Date:04/02/2014 2:00 PM (GMT-05:00)
To: tesla@xxxxxxxxxx
Subject: Tesla Digest, Vol 78, Issue 2
Message: 3
Date: Wed, 2 Apr 2014 07:15:58 -0400
From: Alex Yuan <alexhanyuan@xxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Primary
Message-ID:
<CA+mXcaavePR8hBw=yUGUohvERodL1oe08NsWL5hqSJfrecfDVQ@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1
How much primary current are you going to be running?
It should be fine for <300Apk
On Wed, Apr 2, 2014 at 6:45 AM, t-burns14 <t-burns14@xxxxxxxxxxx> wrote:
> Is 1/8th inch copper tubing okay for the primary coil? I bought the
> thinner tubing for the sake of cost, assuming it wouldn't matter, but I
> want to make sure.
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla