[Home][2014 Index] Re: [TCML] Resin or fiberglass perfboard for terry filter? [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Resin or fiberglass perfboard for terry filter?

On 09/16/2014 07:36 AM, Dave Boyle wrote:
>
> Oh and I tried the "strip the shield off the video cable" trick to make
> HV wire and the stuff is useless. It burns through when close to
> anything else. One thing I did that turned out to be a total success was
> using twist lock bnc connectors for my hv cabling. Those things perform
> like a champ!

You need to use cable with a solid HDPE dielectric, not the foam type.
RG-8 works well for this.

Jon

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla