[Home][2015 Index] Re: [TCML] Variable Ballast [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Variable Ballast



      From: Jon Danniken <danniken@xxxxxxxxxxx>
 To: Tesla Coil Mailing List <tesla@xxxxxxxxxx> 
 Sent: Thursday, July 2, 2015 2:28 PM
 Subject: Re: [TCML] Variable Ballast
   
On 07/01/2015 11:14 AM, Miles Mauldin wrote:
> Do I need to find an old welder, or will an inexpensive new one work
> just as well. Read many posts about shorting the secondary and using
> the primary in line with a pole pig. Thoughts, ideas or suggestions
> all wanted for a variable ballast.

You can get an old 220V arc welder for cheap on craigslist if you are
patient,  less cheap if you are not patient.  As a bonus, you also get a
welder.

Jon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


  
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla