> So I put dmm in amp mode, switch probe leads to 10 amps plug, current
> Xformers over the cord or just the hot wire?
hot wire or Neutral
NOT BOTH
NOT Gnd
>And if it is running 25 amps I would see 2.5 amps on my meter?
Just so assuming a 10x current transformer...
> Subject: Re: [TCML] Power factor correction
>
> John,
>
>> Check out eBay for a current transformer. A 50:5 unit will multiply
>> your DMM readings by factor of 10. They should be available for under
>> $20 with some diligent looking.
>
>> Something like the following would work. (no connection to seller.)
http://www.ebay.com/itm/130895906892
best
dwp
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla