Apparently some of those do have a mirror outer finish, you have to look
through the pictures in the listings.
On Sun, Sep 30, 2018, 3:25 PM Allen Bishop via Tesla <tesla@xxxxxxxxxx>
wrote:
You could spot weld them together rim to rim then grind off half the rim
and mig weld them then grind off the rest of the rim and mig weld the rest.
Then grind the welds smooth and buff. Problem is the inside of the bowls
are mirror finish but the outside is satin not mirror.
Allen Bishop
Colorado Springs
Sent from my iPad
On Sep 30, 2018, at 11:58 AM, charles rakes <crakes29@xxxxxxxxx> wrote:
Split a rubber hose and use silicon rubber to attach. That's what I'd
try. Charles
On Sun, Sep 30, 2018 at 12:09 PM homerlea--- via Tesla <tesla@xxxxxxxxxx
wrote:
Could you fasten two together and put a thick ring of insulation around
the rim to keep it from breaking out too soon?
-----Original Message-----
From: Matthew Sweeney <msweeney23@xxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Sun, Sep 30, 2018 7:55 am
Subject: [TCML] Cheap large VDG terminals
Beautiful mirror finish 30qt/22 inch stainless steel mixing bowls going
for
$20 on eBay .
I'm still figuring out what to do with the lip.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla