Oops that should read Cp x Lp = Cs x Ls. Damned phone keeps changing
things😊
On Sun, Mar 17, 2019, 2:21 PM Matthew Deming <mddeming44@xxxxxxxxx> wrote:
> To maintain resonance Cp x Lp = Vs x Ls . So if you double Co then you
> need to either reduce Lp by 50% or double Cs. Tapping the primary at fewer
> turns is the easiest way, but the smaller inductance means higher initial
> in-rush current which can stress your caps etc. Good design is always a
> balancing act.
>
> On Sun, Mar 17, 2019, 1:58 PM Douglas Johnson <doug379306@xxxxxxxxx>
> wrote:
>
>> Using Teslamap to configure a coil,if the Optimum MMC Capacitance for SG
>> coil calls for 10nf,
>> How Would the resulting performance of the coil be affected using a MMC of
>> 20nf?
>> Doug
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxxxxxxxxxx
>> https://www.pupman.com/mailman/listinfo/tesla
>>
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla