[Home][2021 Index] Re: [TCML] Maxwell .02uf/45kv cap [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Maxwell .02uf/45kv cap



Bert Hickman sent a post responding to the question about whether a bulge
on a Maxwell cap is a certain bad-thing.  As one of the TCML mod's I'm
privy to the submitted post, and there appears to be some mystery as to why
his post was not sent to the List.  I can assure you it will be sent and
there are no shenanigans here ;-)

I have lowered the starting bid to $10.  I purchased a lot of six of these
Maxwells about 10 years ago, using some and selling the others. There have
been no complaints.

Gary

On Sun, Feb 28, 2021 at 7:56 PM David Weiss <hweiss@xxxxxxxxxx> wrote:

> That might be a warning!  For me, it’s the brown color of the oil when it
> used to be green.  I’ll have to get that one changed out before any use.
>
> David E Weiss
>
> Sent from Mail for Windows 10
>
> From: Gary Lau
> Sent: Sunday, February 28, 2021 12:12 PM
> To: derstrom8@xxxxxxx; Tesla Coil Mailing List
> Subject: Re: [TCML] Maxwell .02uf/45kv cap
>
> Hi Matt,
>
> Good eye, it's not your imagination.  Yes the label-side and only that side
> appear to be bulging.   I don't know if that is atypical.  Anyone else know
> if a bulging side is an indicator of trouble on Maxwell's?
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla