[Prev][Next][Index][Thread]
Re: Mylar Interlayer Insulation
-
To: tesla@pupman.com
-
Subject: Re: Mylar Interlayer Insulation
-
From: "Dan Kunkel" <kunk77@juno.com> (by way of Terry Fritz <twftesla@uswest.net>)
-
Date: Thu, 04 May 2000 22:24:01 -0600
-
Approved: twftesla@uswest.net
-
Delivered-To: fixup-tesla@pupman.com@fixme
Max aka Frankenstein's Helper,
My archives reveal that mylar has an excellent breakdown voltage of 7500
volts per mil (or thousanth of an inch) and a dielectric K value of
3.0-3.1 The 7500 volt value I think is for DC current, you will want to
overbuild your insulation a bit anyway for added protection. Hope this
helps...
Dan
________________________________________________________________