Grounding Qusetions

• To: tesla@pupman.com
• Subject: Grounding Qusetions
• From: "Trent Mullins" <neontrent@earthlink.net> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Fri, 21 Apr 2000 19:57:55 -0600
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

Hello Everybody,
The newbie here again with some grounding questions:
 
My system has many grounds.  
Can I connect all of them together at a central point?
It sure would be easier and better looking.
 
I have the following grounds:
 
Seondary coil ground
Strike rail ground
NST case ground
Vaccum motor on my RQ gap ground
NST safety gap ground
Input power grounds from both variacs 
(10 amp for the vacuum motor & 25 amp for the 2 NST's)
 
I would like to connect all of these to the dedicated ground rod if possible.
I worry about getting zapped on my control panel with the variacs.
Thanks a million,
 
Trent Mullins,
<mailto:neontrent@earthlink.net>neontrent@earthlink.net
 
 
 
 

• Prev: Web Site Update
• Next: Biggg Coil update
• Index(es):
  • Main
  • Thread