Oops! My mistake! (was: Getting Closer to First Light with 10KVA Pig)

["Ryan Ries" <spud@wf.net> (by way of Terry Fritz <twftesla@uswest.net>)]

	You guys were right and I was wrong about the voltages on the pig.  It is
a 14.4/24.9Y and not some weird 28.8.  Sorry for the mistake.  So, here is
what I have gathered:
	When I apply 120 volts to the HV terminals on the pig, I read exactly 2
volts across X1 and X3 LV terminals (leaving X2, the center terminal,
alone).  Thus, a 60:1 turns ratio.  So, if I put 240v (42 amps) into X1 and
X3, I would get 14.4Kv (10KVA) out the HV terminals, correct? 

	Thanks,
	    Ryan Ries