Re: Research directions

• To: tesla-at-pupman-dot-com
• Subject: Re: Research directions
• From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 17 Apr 2000 17:15:29 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Scott,

> Original Poster: "Scott Stephens" <Scott2-at-Mediaone-dot-net> 
<snip>

Just commenting on one excerpt:
 
> Of course this requires formidable control challenges, a constant current
> regulator on the primary or secondary.

A secondary without a top load is probably about as close as you're 
going to get to a current source in a TC and it's not perfect because 
without a top terminal, the upper portion of the winding becomes 
capacitive. Some resistance or lumped inductance between the top 
and target would help.

Regards,
Malcolm

> Scott
<snip>

• Prev: Re: contro box ideas from fellow coilers
• Next: A few questions and comments
• Index(es):
  • Main
  • Thread