Re: Secondary Core.

• To: tesla-at-pupman-dot-com
• Subject: Re: Secondary Core.
• From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 18 Apr 2000 17:34:37 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Charles,

On 17 Apr 00, at 20:38, Tesla List wrote:

> Original Poster: "Charles Arruda" <carruda-at-channelseek-dot-com> 
> 
> What effect does the secondary "core" have on the overall
> design of the coil?  Most people tend to use PVC, but does the
> material and its thickness have an effect on the resonant
> freq. of the secondary? 

Not to a significant extent if any.

 I would think it would have an effect
> on the inductance and cause the freq. to shift.  What are the
> offsets to the resonant calculations? 

Plastics are generally non-magnetic. There is no "offset" required.  

 Has anyone tried
> "unique" materials to wrap their coil on? What effect does
> having an outside covering on the coil (several layers of an
> insulative plastic?  Does it help with shorting or corona?

It can help minimize flashovers and pri-sec sparks. Most people 
don't bother except when using very high values of coupling.

Regards,
Malcolm

• Prev: Re: 3 phase resonators
• Next: Re: Lumped vs. T-line - You be the judge...
• Index(es):
  • Main
  • Thread