RE: Please Check my MMC Calcs!

• To: tesla-at-pupman-dot-com
• Subject: RE: Please Check my MMC Calcs!
• From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 28 Apr 2000 21:04:05 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Your calc's look right to me.  The only thing I would add is, the cost of
the required caps is lower if you choose a larger value per cap, i.e. .056uF
per cap.

Gary Lau
Waltham, MA USA

		-----Original Message-----
		From:	Tesla List [mailto:tesla-at-pupman-dot-com]
		Sent:	Friday, April 28, 2000 2:30 PM
		To:	tesla-at-pupman-dot-com
		Subject:	Please Check my MMC Calcs!

		Original Poster: "Bob Berg" <berg_bob-at-hotmail-dot-com> 

		If someone can give me a yea or nea on my mmc calcs, it
would be greatly 
		appreciated:

		Transformer: 12KV -at- 60ma

		Using the Panasonic caps rated at 1600Vdc Using a per cap
value of .012uF I 
		come up with:
		12 Caps per string * 13 Strings = .013uF rated at 19,200Vdc.
		Does this sound good?
		Any one interested in a bulk buy?

		Thanks
		Bob
	
________________________________________________________________________
		Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail-dot-com
		

• Prev: Re: Toroid Capacitance calculated without earth-distance?
• Next: RE: Toroid Capacitance calculated without earth-distance?
• Index(es):
  • Main
  • Thread