Sync gap finished, website photos

["Tesla list" <tesla@pupman.com>]

Original poster: "by way of Terry Fritz <twftesla@uswest.net>" <FutureT@aol.com>

Hello coilers,

I finally completed my new 120 bps sync rotary gap, which has
4 series gaps.  The electrodes and holders are copper.  The 3/8" 
x 6.5" rotor is made of G-10.  The motor is 1/20HP.

Photos of this project can be seen at the bottom of my homepage at:

       http://hometown.aol.com/futuret/page3.html

John Freau