Re: DC Controlled Reactance Choke

• To: tesla@pupman.com
• Subject: Re: DC Controlled Reactance Choke
• From: "Jeff W. Parisse" <jparisse@teslacoil.com> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Fri, 07 Jan 2000 02:18:05 -0700
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

D.C.,

Do you have a commercial unit yet?...

Jeff


> This concept works very well.  We use it in our reactors for higher
powered
> coil systems.  Using a gapped core E-I reactor you wind approx 150 turns
> around the center of the E lamination and then wind your normal reactor
> windings over this.  By running approx 75-100 VDC at 3-5 amps through the
> center winding you have complete control over the reactor's performance.
>
> Dr. Resonance

• Prev: Re: Nathan's Problems Solved.
• Next: RE: DC Controlled Reactance Choke
• Index(es):
  • Main
  • Thread