Re: calculating bps for sync rsg

• To: tesla@pupman.com
• Subject: Re: calculating bps for sync rsg
• From: "Dr. Resonance" <Dr.Resonance@next-wave.net> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Thu, 02 Mar 2000 17:15:05 -0700
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

Jon:

If your rotor is running at 1725 RPM it is NOT synchronous.  It needs to run
at precisely 1800 RPM to be synchro.  It either has to be a true synchro
motor or a standard motor that is modified.

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla@pupman.com>
To: tesla@pupman.com <tesla@pupman.com>
Date: Thursday, March 02, 2000 7:01 AM
Subject: calculating bps for sync rsg


>Original Poster: "Jon Lagler" <rockcrawl@netzero.net>
>
>Hello,
> This may be a dumb question, but please bear with me, I'm kinda new at
this.
>How do I calculate the break rate of my synchronous rotary gap? My rotor
has 4
>contacts. it is a 1/2 hp motor, 1725 rpm(I think), 60hz. Whatever it is, it
>seems to work well.
>
>
>Thanks in advance,
> Jon
>
>
>

• Prev: Re: calculating bps for sync rsg
• Next: Re: NST's ARE ALL DEADLY !!!!!!!!
• Index(es):
  • Main
  • Thread