[Prev][Next][Index][Thread]
Re: Temporary electrodes for rotory
-
To: tesla@pupman.com
-
Subject: Re: Temporary electrodes for rotory
-
From: Terry Fritz <twftesla@uswest.net>
-
Date: Sat, 04 Mar 2000 12:57:45 -0700
-
Approved: twftesla@uswest.net
-
Delivered-To: fixup-tesla@pupman.com@fixme
-
In-Reply-To: <d2.159d1f2.25f284db@aol.com>
At 10:25 AM 03/04/2000 -0500, you wrote:
>In a message dated 3/4/2000 6:07:37 AM Mountain Standard Time,
>tesla@pupman.com writes:
>
>> Original Poster: "Jeffery Pederson" <kd4lyh@webtv.net>
>>
>> Which is better nickle plated brass or just brass acorn nuts for
>> temporary electrodes in a rotory.
>> Regards
>>
>My guess is that the nickel plating will be blasted off in short order. I
>haven't tried this though.
>Mike
>
I have used nickle plated nuts and they seem to hold up better than brass
till the plating breaks through. I worry about the skin depth of the
nickle adding to EMI noise, but I'm just like that ;-))
Cheers,
Terry