[Prev][Next][Index][Thread]

Re: gmhei


I will add that the coil I used for the record was the after market brand
"Wells" - C834.  One old coil I found had the primary wound so tight that
the wire cross section in the primary was crushed into a diamond shape!  It
did not do well...  The Wells brand has a lot of stuff about how well built
and reliable there stuff is so maybe they try harder... - Terry 


At 07:15 PM 05/19/2000 -0400, you wrote:
>another note to those shooting for there name on the cup.
>one of the coils i baught from napa had a clearer epoxy then most. i
>seen that the two primary leads are crosed over each other in the coil.
>this could have been the problem with my shorting. i dug some of the
>epoxy out and seprated them. i don't know if all are like this but be
>aware.
>thank you terry for the starting out slow idea, i will head your advise.
>
>hope this helps all.
>marc
>