[Prev][Next][Index][Thread]

Re: Better bottle caps



..they use aluminium powder in pyrotechnics,
when I was 15 I did some also with it,
and results where impressive. It burns like h**l !
would someone use it near any spark ?
me not
I think whe should mantain coiling as safe as possible
It has so much hazards itself...

but it's only my opinion :=)
ciao all
Daniele

-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: luned́ 29 maggio 2000 5.53
Subject: RE: Better bottle caps


>Original Poster: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk>
>
>
>
>-----Original Message-----
>From: Tesla List [mailto:tesla-at-pupman-dot-com]
>Sent: Sunday, May 28, 2000 6:28 PM
>To: tesla-at-pupman-dot-com
>Subject: RE: Better bottle caps
>
>
>Original Poster: "Dan and Nancy" <ntesla-at-logicsouth-dot-com>
>
>At 06:57 PM 5/27/00 -0600, you wrote:
>>Original Poster: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk>
>>
>>well, yes, they would work, but I would imagine that you wouldn't get a
>very
>>good capacitance cos think of the
>>area of the stuff that is NOT in contact with the glass. Surely you would
>>get lots of "hot spots".
>> Richard.
>>
>>-----Original Message-----
>>From: Tesla List [mailto:tesla-at-pupman-dot-com]
>>Sent: Sunday, May 28, 2000 12:14 AM
>>To: tesla-at-pupman-dot-com
>>Subject: Re: Better bottle caps
>>
>>
>>Original Poster: Mouser25-at-aol-dot-com
>>
>>would copper bb's work for a bb gun?
>
>Dudez,
>You can get very fine aluminum powder at a paint store, and I think other
>powdered metals also. It's a little messy to work with, but I've used it to
>fill glass electrodes in plasma globes and it works great. There's no
>reason I can think of to not use it in a bottle cap. One thing though, the
>powder is so fine that if it's in the air floating around it can be
>flammable. I believe I'd still put oil or epoxy or something on the top of
>the powder in the bottles to keep the air away.
>Also, I saw plans a long time ago for van de graaf terminals that used
>varnish mixed with a great deal of aluminum powder. Almost like aluminum
>glue, I'd guess. You could mix a lot of that powder with some varnish or
>polyurethane and coat the insides and outsides of your bottles with it and
>let it dry. That would probably work better than filling the bottles with
>just the powder.
>Hope this helps,
>Dan Kline
>ntesla-at-logicsouth-dot-com
>
>Hi Dan
> If you mix aluminium powder with something inflammable like
>varnish...... isn't that getting towards rocket booster fuel ?
> Richard.
>
>