[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
I am building my first coil and am pretty far along in construction.
So far I am using a 15kv 30ma nst to drive the coil. I have build a
bottle cap which I calculated to be around 8nf. I have a static gap and
am going with a 13 turn primary and a 1100 turn 4 inch diameter
secondary with 24 gauge wire. My question is this: Can the primary be
wound with 14 gauge house wire? I had quite a few difficulties winding
one out of copper tubing.
Tesla mailing list