RE: [TCML] Primary standoff's and attaching them to the primary base.

[Thomas Schmit <Thomas.Schmit@xxxxxxx>]

I second the nylon bolts. Drill and tap your stand-offs for 1/4 by 20, for instance, and pick up a bag of nylon 1/4 bolts at your local big box store. You can also order large quantities of nylon bolts online - probably much cheaper if you need more than a small handful. 

________________________________

From: tesla-bounces@xxxxxxxxxx on behalf of Vinnie
Sent: Fri 4/23/2010 7:51 PM
To: Tesla Coil Mailing List
Subject: [TCML] Primary standoff's and attaching them to the primary base.



Hello All

 I've been trying to come up with some practical ways to attach my High-density polyethylene standoffs to a wood base
and there's pretty much no adhesive that I can find to do this. I'm thinking I might have to attatch them by some
sort of mechanical fastener. Does anyone have any suggestions?

Thanks for your time.

Vinnie
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla