Re: Recycled Magnetics II (fwd)

[Steven Roys <sroys@xxxxxxxx>]

---------- Forwarded message ----------
Date: Mon, 15 Dec 2003 21:38:20 -0800
From: Jim Lux <jimlux@xxxxxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: Recycled Magnetics II (fwd)

If it's CA, then nitromethane dissolves it quite nicely.  It's sold in small
bottles as CyanoAcrylate debonder, but also available in gallon bottles as
model airplane glow plug engine fuel, or from racing fuels distributors (VP
Racing, etc.).  If you know anyone who's into drag racing (cars or bikes),
you can probably get a little bit without much trouble.


----- Original Message -----
From: "High Voltage list" <hvlist@xxxxxxxxxx>
To: <hvlist@xxxxxxxxxx>
Sent: Monday, December 15, 2003 6:43 PM
Subject: Re: Recycled Magnetics II (fwd)


> Original poster: Steven Roys <sroys@xxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Mon, 15 Dec 2003 20:34:11 +0200
> From: gtyler <gtyler@xxxxxxxxxxxxxxx>
> To: High Voltage list <hvlist@xxxxxxxxxx>
> Subject: Re: Recycled Magnetics II (fwd)
>
> Used to be epoxy, but nowdays  a cyano-acrilate adhesive like loctite
> 418 is used. if you heat it to 200 deg c it should be possible to
> separate it.
>
> Geoerge
>
>