Re: Lifter project. (fwd)

[<sroys@xxxxxxxxxxxxxxxxx>]

---------- Forwarded message ----------
Date: Mon, 18 Oct 2004 09:53:26 -0500
From: Dr. Resonance <resonance@xxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: Lifter project. (fwd)


They are NTE 500A rated 10 kV to 30 kV at 1 mA.  For short duty cycles such
as charging caps the ratings can be exceed for short time periods.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message ----- 
From: "High Voltage list" <hvlist@xxxxxxxxxx>
To: "hvlist" <hvlist@xxxxxxxxxxxxxxxxx>
Sent: Sunday, October 17, 2004 11:44 PM
Subject: Re: Lifter project. (fwd)


> Original poster: <sroys@xxxxxxxxxxxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Thu, 14 Oct 2004 12:08:03 -0400
> From: humanb@xxxxxxxxxxxxxxxxxxx
> To: High Voltage list <hvlist@xxxxxxxxxx>
> Subject: Re: Lifter project. (fwd)
>
> DC, what are the ratings on your NEC triplers?
>
> Thanks,
>
> David Trimmell
>
> On Thu, 14 Oct 2004 09:57:44 -0600 (MDT)
>   "High Voltage list" <hvlist@xxxxxxxxxx> wrote:
> > Original poster: <sroys@xxxxxxxxxxxxxxxxx>
> >
> >
> >
> > ---------- Forwarded message ----------
> > Date: Thu, 14 Oct 2004 10:24:20 -0500
> >From: Dr. Resonance <resonance@xxxxxxxxxx>
> > To: High Voltage list <hvlist@xxxxxxxxxx>
> > Subject: Re: Lifter project. (fwd)
> >
> >
> > We have very large flybacks in stock.  Coupled with a
> >NEC tripler they will
> > provide 30-40 kV DC.  Flybacks are $25 and NEC triplers
> >are around $20.
> > Beats hauling around a monitor.
> >
> > Dr. Resonance
> >
> > Resonance Research Corporation
> > E11870 Shadylane Rd.
> > Baraboo   WI   53913
> > ----- Original Message ----- 
> >From: "High Voltage list" <hvlist@xxxxxxxxxx>
> > To: "hvlist" <hvlist@xxxxxxxxxxxxxxxxx>
> > Sent: Wednesday, October 13, 2004 9:52 PM
> > Subject: Lifter project. (fwd)
> >
> >
> >> Original poster: <sroys@xxxxxxxxxxxxxxxxx>
> >>
> >>
> >>
> >> ---------- Forwarded message ----------
> >> Date: Tue, 12 Oct 2004 23:52:14 -0500
> >> From: Adam Britt <Beans45601@xxxxxxxxx>
> >> To: hvlist@xxxxxxxxxx
> >> Subject: Lifter project.
> >>
> >> Hello, My name is Adam, and for my senior science
> >>project, i am doing
> >> "What is the ratio between efficiency and area of the
> >>grounded plate
> >> of an ion lifter?". But, i have a couple of questions.
> >>
> >> I work at a childrens museum, and for a class, the kids
> >>take appart
> >> computer monitors, so i have a lot at my disposal. But,
> >>i don't want
> >> to have to carry the monitor around with me, so, if i
> >>disconnect all
> >> the wires from the main circuit board, with the flyback,
> >>except for
> >> the ac in, and the HV out, will it still work, or does
> >>it need to be
> >> hooked up to the crt and all that good stuff to work?
> >>Also, what is
> >> the usual output of a computer monitor, and is the
> >>actual voltage ever
> >> printed inside the case? One more question, if i hook up
> >>a couple of
> >> the flybacks together, will this just destroy them all
> >>real quick, or
> >> should i do this to get more amps, out.
> >>
> >> Thank you for everything.
> >> -Adam
> >> KD5WIT
> >>
> >>
> >>
> >
> >
>
>
>