[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)



Original poster: Steven Roys <sroys@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Tue, 23 May 2006 12:40:38 -0600
From: Dr. Resonance <resonance@xxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)



Ok, I will dig a bit and find it for you.

BTW, what's your address again for mailing the MMC caps?

Dr. Resonance

[This discussion would be better served off-list.  SRR]

----- Original Message ----- 
From: "High Voltage list" <hvlist@xxxxxxxxxx>
To: "hvlist" <hvlist@xxxxxxxxxx>
Sent: Tuesday, May 23, 2006 8:52 AM
Subject: Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)


> Original poster: Steven Roys <sroys@xxxxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Mon, 22 May 2006 10:14:19 -0700
> From: Krohns <2halice@xxxxxxx>
> To: High Voltage list <hvlist@xxxxxxxxxx>
> Subject: Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)
>
> Hi DC,
>
> Got the block diagram but not the schematic.
>
> Hal
>
>
>
> ----- Original Message ----- 
> From: "High Voltage list" <hvlist@xxxxxxxxxx>
> To: "hvlist" <hvlist@xxxxxxxxxx>
> Sent: Monday, May 22, 2006 6:45 AM
> Subject: Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)
>
>
>> Original poster: Steven Roys <sroys@xxxxxxxxxx>
>>
>>
>>
>> ---------- Forwarded message ----------
>> Date: Thu, 18 May 2006 09:29:56 -0600
>> From: Dr. Resonance <resonance@xxxxxxxxxx>
>> To: High Voltage list <hvlist@xxxxxxxxxx>
>> Subject: Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)
>>
>>
>>
>> Hal:
>>
>> Did you receive the coin crusher schematic I sent you?  If not, forward
> your
>> address and I will send another via the USPS.
>>
>> DC
>>
>> Dr. Resonance
>> ----- Original Message ----- 
>> From: "High Voltage list" <hvlist@xxxxxxxxxx>
>> To: "hvlist" <hvlist@xxxxxxxxxx>
>> Sent: Thursday, May 18, 2006 9:00 AM
>> Subject: RE: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)
>>
>>
>> > Original poster: Steven Roys <sroys@xxxxxxxxxx>
>> >
>> >
>> >
>> > ---------- Forwarded message ----------
>> > Date: Tue, 9 May 2006 19:43:36 -0700
>> > From: Brian <brianb@xxxxxxxxxx>
>> > To: 'High Voltage list' <hvlist@xxxxxxxxxx>
>> > Subject: RE: Coin Shrinking (was: Of Mice and HV (fwd))
>> >
>> > Hal,
>> >
>> > You can check out my site and/or Ross Overstreet's but Bert is the king
>> > of coin shrinking...
>> >
>> > http://www.brianb.org/images/Backyard%20Science/Quarter%20Shrinker/pulse
>> > _discharge.htm
>> >
>> > http://www.hot-streamer.com/ross/projects/Pulse/pulse.htm
>> >
>> > Regards,
>> > Brian B.
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: High Voltage list [mailto:hvlist@xxxxxxxxxx]
>> > Sent: Tuesday, May 09, 2006 7:16 AM
>> > To: hvlist
>> > Subject: Re: Of Mice and HV (fwd)
>> >
>> > Original poster: Steven Roys <sroys@xxxxxxxxxx>
>> >
>> >
>> >
>> > ---------- Forwarded message ----------
>> > Date: Mon, 8 May 2006 09:08:34 -0700
>> > From: Krohns <2halice@xxxxxxx>
>> > To: High Voltage list <hvlist@xxxxxxxxxx>
>> > Subject: Re: Of Mice and HV (fwd)
>> >
>> > Hello,
>> >
>> > I'm new to this list.
>> >
>> > D.C. Cox has told me about the coin crusher setup.  Would anyone be
>> > willing
>> > to share a schematic and construction details?.... or an address where
>> > they
>> > can be found on the web?  Thanks in advance.
>> >
>> > Hal in Tucson
>> >
>> > [A google search on "coin crusher" gives a few sites.  Bert Hickman's
>> > site
>> > is nice - http://www.teslamania.com/ SRR]
>> >
>> > ----- Original Message ----- 
>> > From: "High Voltage list" <hvlist@xxxxxxxxxx>
>> > To: "hvlist" <hvlist@xxxxxxxxxx>
>> > Sent: Monday, May 08, 2006 7:11 AM
>> > Subject: Re: Of Mice and HV (fwd)
>> >
>> >
>> >> Original poster: Steven Roys <sroys@xxxxxxxxxx>
>> >>
>> >>
>> >>
>> >> ---------- Forwarded message ----------
>> >> Date: Wed, 03 May 2006 15:58:35 -0700
>> >> From: Ed Phillips <evp@xxxxxxxxxxx>
>> >> To: High Voltage list <hvlist@xxxxxxxxxx>
>> >> Subject: Re: Of Mice and HV (fwd)
>> >>
>> >> I designed a similar type of setup we called the "Coon Cannon".
>> >>
>> >> Take a 6" piece of PVC pipe about 2' long. Cap one end. Mount of pair
>> > of
>> >> Carriage bolts about 6" from the capped end with the Heads inside the
>> > pipe.
>> >> Connect these to a large cap (like one of our 300lbs coin crusher
>> > caps).
>> >> Place bait in the end-cap, and setup your charging system.
>> >>
>> >> Raccoon/Opossum/Skunk/Rat, etc wanders in the pipe, gets to the foot,
>> > and
>> >> closes the circuit.
>> >>
>> >> *FOOMP*
>> >>
>> >> Trap is self cleaning and self resetting.
>> >>
>> >>
>> >> Chris Boden"
>> >>
>> >>
>> >> You must have pretty small critters where you are!  I don't think many
>> > of
>> > our grown coons, possums, or skunks would go into a hole that small 
>> > that
>> > they hadn't dug themselves.  As for self-cleaning, based on lots of
>> > experience I wouldn't bet on it!!
>> >>
>> >> Ed
>> >>
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>
>
>
>