Re:valve diode tubes ? (fwd)

• To: tesla-at-pupman-dot-com
• Subject: Re:valve diode tubes ? (fwd)
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Thu, 6 Aug 1998 21:55:44 -0600 (MDT)
• Approved: mod1-at-pupman-dot-com

---------- Forwarded message ----------
Date: Thu, 06 Aug 1998 15:48:05 +0300
From: Marco Denicolai <marco-at-vistacom.fi>
To: tesla-at-pupman-dot-com
Subject: Re:valve diode tubes ?

>Date: Wed, 5 Aug 1998 17:10:03 +0100
>From: "chris.swinson" <chris.swinson-at-zetnet.co.uk>
>To: tesla list <tesla-at-pupman-dot-com>
>Subject: valve diode tubes ?
>
>I'm after a diode or valve that will handle 240 watts min, thats at 8Kv -at-30
>ma.  This must be the minimum spec.
>
>Does anyone know of a supplier for them or how much they cost or anything
>really ?
>
>thanks.
>
>
>
>All the beST,
>Chris.
>
>chris.swinson-at-zetnet.co.uk
>

Use a MOT diode: typically they are 9kV 450mA and very cheap.



________________________________________________________________________

 Marco Denicolai                   Vista Communication Instruments, Inc.
 Hardware Development Manager      www.vistacom.fi   

 marco-at-vistacom.fi                 Kaisaniemenkatu 13 A
 fax:    +358-9-622-5610           SF-00100 HELSINKI
 phone:  +358-9-622-623-15         Finland

   Remember, Murphy was an optimist! I am not...
________________________________________________________________________

• Prev: Re: Primary/sec'y spacing for my big coil. (fwd)
• Next: Re: Solid state cameras (fwd)
• Index(es):
  • Main
  • Thread