[Prev][Next][Index][Thread]

RE: Polycarbonate Glue



Methylene Chloride.
I use brand name Weld-On #16, which is a jellied form of it.

> -----Original Message-----
> From: Tesla List [mailto:tesla-at-pupman-dot-com]
> Sent: Wednesday, October 21, 1998 4:30 PM
> To: tesla-at-pupman-dot-com
> Subject: Polycarbonate Glue
>
>
> Original Poster: gweaver <gweaver-at-earthlink-dot-net>
>
> I am working on a TC project.  I cut some plastic pieces but can't find
> anything that will glue them together.  This plastic must be
> polycarbonate.
> Acetone has no effect on it.  PVC glue does nothing to it and
> peals off like
> a sheet of paper when its dry.  Tried epoxy, polyester, super glue, bondo,
> model car glue, Methyl Ethyl Ketone Peroxide, acetone and none of
> them work.
> Any suggestion?
>
> Gary Weaver
>
>
>