Re: Tesla Coil toroid Size

• To: tesla-at-pupman-dot-com
• Subject: Re: Tesla Coil toroid Size
• From: HomerLea-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Fri, 18 Sep 1998 23:13:10 -0600
• Approved: terryf-at-verinet-dot-com

In a message dated 9/18/98 4:29:10 PM Pacific Daylight Time, tesla-at-pupman-dot-com
writes:

>  The best we might do to hit this on
>  single phase is run pure, ultra stiff, DC!  A costly choice, but it
>  could be done.
Why does the DC have to be so pure??? It would be cheap enough to build a non-
ripplefree supply with 8020 or 705A tubes, say a 30kv supply. That would give
you 3 kw of power per tube (or a 20 kv supply at 2 kw per tube).

jim heagy

• Prev: Re: 40 Amp variac ballast
• Next: Our friend the FCC
• Index(es):
  • Main
  • Thread