[Prev][Next][Index][Thread]

Re: Capacitor design question



Chris,
   I have tried this "nested" configuration  you've described. It works
very well,  if you can find containers that properly nest.
Dave Hartwick

Tesla List wrote:

> Original Poster: Chris Tominkson <internetinbox-at-yahoo-dot-com>
>
> I was thinking of the "glassless saltwater caps" and thought of a
> design like this:
>
>  +     -
>  |     |
> ||S|   |   |  |     S=Salt water
> |  |<-P|   |  |     P=Plastic or another dielectric
> | S|   |   | S|
> |  |      S|  |
> | S|  S    |  |
> |  |_______| S|
> |______S______|
>
> Understand? It would be like multi layered saltwatered leyden jar
> caps. It would look like the drawing only you could put as much
> containers as you wanted inside the shell (could be a five gal.paint
> bucket). Just an idea I had for a more compact cap....
>
> Chris.
> ==
> ...Courtesy of Yahoo! Mail...
>
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com