RE: I need help with my crappy coil

• To: tesla-at-pupman-dot-com
• Subject: RE: I need help with my crappy coil
• From: Terry Fritz <twftesla-at-uswest-dot-net>
• Date: Tue, 18 Apr 2000 17:32:29 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
• In-Reply-To: <LOBBKNJDHNJJKPBJECPBEECOCGAA.couturejh-at-worldnet.att-dot-net>
• References: <4.1.20000418065324.00a2fbe0-at-pop.dnvr.uswest-dot-net>

Hi John,

	I just wanted to give you a warm and happy welcome back from all of us!!

Cheers,

	Terry


At 01:09 PM 04/18/2000 -0700, you wrote:
>
>To all:
>
>This coil is not a good design and requires several major changes. It is a
>good example of how the JHCTES Ver 3.0 TC computer program can show you how
>to get about 34 inch sparks from a MOT transformer rated 2100 volts, 450 ma,
>945 watts. The default design in the program is for a 15 KV, 60 ma, 900 watt
>neon transformer. This is a typical coil that has been built by many coilers
>and they have obtained streamer sparks up to 4 feet. The MOT transformer has
>approximately the same wattage but would give less spark length because of
>the lower voltage.
>
>Only 3 changes would have to be made in the inputs of the program, 2100
>volts, 450 ma, and a primary capacitor of about .02 uf. The program outputs
>would then show you the necessary parameters to build a coil that would give
>you much longer sparks.
>
>The JHCTES Ver 3.0.7 will be available for free downloading in about a week.
>Watch for more info on the Tesla List.
>
>John H. Couture
>
>snip...

• I need help with my crappy coil
• From: "m0neyfromyuba" <m0neyfromyuba-at-netzero-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)

• Prev: Re: NST Safety Gap Question.
• Next: RE: I need help with my crappy coil
• Index(es):
  • Main
  • Thread