[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Conductors



Tesla list wrote:
> 
> Original poster: "Sam Beck" <Sam-at-peterbeck-dot-com>
> 
>         Hello again.  I am also trying to decide if stainless steel is a
> better conductor than nickel-plated brass.  I am going to use these as
> screw-posts to put the MIG wielder tips on.
> 
>         Sam Beck

Sam,

The short answer. No it isn't.

On my relative resistance chart, where 1 foot of .001" diameter round
copper wire has a resistance of 10.37 ohms:

silver          =  .936
copper          = 1.000
tungsten        = 3.203
brass           = 4.822
nickel          = 5.786
stainless steel = 52.941
nichrome        = 65.092

Ed Wingate RATCB