[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sync gap finished, website photos



Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <FutureT-at-aol-dot-com>

Hello coilers,

I finally completed my new 120 bps sync rotary gap, which has
4 series gaps.  The electrodes and holders are copper.  The 3/8" 
x 6.5" rotor is made of G-10.  The motor is 1/20HP.

Photos of this project can be seen at the bottom of my homepage at:

       http://hometown.aol-dot-com/futuret/page3.html

John Freau