Shellac Qs + Re: PVC Drying

["Alex Madsen" <alexmadsen-at-netzero-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Shellac Qs: All the references to selling pvc or fixing coil windings say to
use shellac. Is there a reason for this or can I use polyurethane?  I am
concerned  about interference with coil operation or water permeability(fire
to!).

PVC drying: This is what the plans from Information Unlimited
(www.amazing1-dot-com) have to say on the pvc drying.
They deal with a lot of high voltage stuff and seem to know what they are
talking about but they are rather expensive.

"Special Note: For maximum performance it is suggested to thoroughly clean
the pvc tube inside and out and allow to dry in a dehumidified room." (I
think a heat gun will do the trick)"several coats of orange shellac should
be applied and allowed to completely dry before proceeding."

That is what U.I. has to say about that!


_______________________________________________
Why pay for something you could get for free?
NetZero provides FREE Internet Access and Email
http://www-dot-netzero-dot-net/download/index.html