Re: bypass cap source

To: tesla-at-pupman-dot-com
Subject: Re: bypass cap source
From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Date: Tue, 07 Mar 2000 11:50:43 -0700
Approved: twftesla-at-uswest-dot-net
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme



Resonance Research carries both the caps and resistors.  Website at
www.ResonanceResearch-dot-com

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Tuesday, March 07, 2000 12:37 AM
Subject: bypass cap source


>Original Poster: pmathus-at-learningco-dot-com
>
>     Tesla folks,
>
>     I am trying to build an rc protection network for my coil before I run
>     it for the first time.  The source I had lined up for doorknob bypass
>     caps has fallen through.  I've been thrashing around in the Pupman
>     archive and on the search engines and having no luck.  This protection
>     network is my last step before first light!!!
>
>     would the MMC poly caps be appropriate for this application? Does
>     anyone have another source I could go to that would be better?  I had
>     expected to use two caps to ground of around 500pf each to ground,
>     with an 1100 ohm 113w resistor on each leg.  I'd really rather not
>     roll my own if it's at all possible.
>
>     thanks,
>
>     paul
>
>
>