Re: Phase control testing

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 4/12/01 1:52:41 PM Eastern Daylight Time, tesla-at-pupman-dot-com 
writes:

> It seems that this configuration should work.  I don't know how much phase 
>  angle adjustment I am getting as I don't have a 60 hz strobe.  I will try 
>  some LEDs running off another variac and turn out the lights and see if I 
> can 
>  see anything.  Then I plan to test it on my small coil again - running at 
> 240 
>  bps, then transfer it to my larger coil for testing this summer - need 
some 
>  better weather.
>  
>  Ed Sonderman

Ed,

It that doesn't work to see the phase shift, you can just observe
the gap under normal fluorescent lighting, and you should be
easily able to see the shift as you adjust the variac.  

John Freau